We are still in the middle of a pandemic
WHO recommends cleaning your hands as often as possible as it is an important factor in the transmission of pathogens of all kinds.Unfortunately, this is IMPOSSIBLE as most of us check our cell phones on average 214 times a day (1,500 times a week!).
According to this study, our cell phones harbor a wide range of microorganisms, potentially harmful to us.
Now we are presenting the #MDcase, a revolutionary #Antimicrobial, #Flexible, and #Customizable mobile phone case, 3D printed with #MDflex, our antimicrobial TPU material.
3D Printed with MDflex®, Antimicrobial* flexible material.
+99.9% Antimicrobial material tested in laboratories in Chile, USA, UK, India, France, and Dubai.
Material tested by NASA to be used in ISS missions.
We are truly committed to making a positive impact on this pandemic situation and keeping our hands clean for longer is one of the key actions to avoid being a vector for the transmission of dangerous viruses and bacteria!
*Antimicrobial = Antiviral + Antibacterial + Antifungal
According to these studies1-4, our cell phones harbor between 20 and 30 times more microbial load than a public restroom! This wide range of microorganisms in high concentrations, is potentially harmful to us, and more important to be aware in this COVID-19 times!
Time for an antimicrobial cell phone case, isn’t it?
Our materials behaves like a wide spectrum antibiotic!
These graphics shows the results of studies conducted by microbiology laboratories in USA, UK, France, Chile and Dubai 1-5. These studies confirm that the Colony Forming Units (CFU) of Staphylococcus aureus MRSA and Escherichia coli DH5α and other common microbes, falls abruptly during the first minutes in contact with PLACTIVE, continuing the elimination of bacterial strains until reaching >99.99% elimination at 24 hours.
1. SITU Biosciences Microbiology Laboratory, USA.
2. Intertek Laboratories, UK
3. Pasteur Laboratory, France
4. Microbiology Laboratory of Universidad Católica de Valparaíso, Chile.
5. Al Hoty Stanger Laboratories, Dubai.
Copper is also a powerful antiviral agent
Copper and Nano Copper inhibits the replication and propagation abilities of SARS- CoV1, influenza2 and other respiratory viruses, having a high antimicrobial (antiviral and antibacterial) potential and, as Copper can inactivate viruses as SARS-like and SARS- Cov1, influenza virus2, H1N1, and eliminates dangerous bacteria like Staphylococcus aureus, Escherichia coli, Listeria, among others, after a short period of exposure, Copper3D’s PLACTIVE® and Mdflex® could be an effective and low-cost complementary strategy to help reducing transmission of several infectious diseases by limiting nosocomial infectious transmission.
1. Han J, Chen L, Duan S, Yang Q, Yang M, Gao C, et al. Efficient and quick inactivation of SARS, coronavirus and other microbes exposed to the surfaces of some metal catalysts. Biomed Environ Sci BES, 2005.
2. Borkow G, Zhou SS, Page T, Gabbay J. A novel anti-influenza copper oxide containing respiratory face mask. PloS One. June 25, 2010;5(6):e11295.
Cuprionix®️ additives are the result of more than 10 years of R&D by teams of Chilean scientists that have been based on the powerful antimicrobial properties of copper to develop a portfolio of additives, materials and solutions scientifically proven by the most prestigious international laboratories. The latest validation that this technology has received was given by the Pasteur Institute (France), which verifies the powerful antiviral action of the Cuprionix®️ additive against Human Coronavirus.
Dr. Claudio Soto, Medical Director of Copper3D, said: “Laboratory validations with viruses have a much higher degree of complexity due to the additional safeguards that must be taken, the type of equipment and highly specialized personnel to perform this kind of tests, and the laboratories prepared for this type of studies are not commonly found as they require high biosafety levels”.
This is why Copper3D has chosen the Pasteur Institute (Lille, France) to carry out this new test against the Human Coronavirus.
Dr. Soto mentions regarding this new validation: “As a company we are always looking for our materials to meet the highest industry standards and therefore we decided to test the antiviral capacity of the additive present in all Copper3D products (Cuprionix® additive), against Human Coronavirus strain 229E (HCoV-229E), under the EN14476 + A2 standard, with extraordinary results so far”.
Institut Pasteur, USM – Unité de Sécurité Microbiologique.
Test report N.200410-EN
Among what was observed, the additive shows a very high antiviral efficacy from the first 30 seconds, capable of reducing the viral load of the Coronavirus by +99.9% in less than one hour.
This process is very quick and begins in the first 30 seconds to see a rapid decrease in viral load of 60.189% (Log 0,4), 90% (Log 1) of reduction at 5 minutes, until reaching a plateau near 60 minutes with a 99.975% of viral reduction (Log 3.6).
On the other hand, and equally relevant, is that this additive did not show any degree of cytotoxicity in this test, therefore we can conclude that it is also safe for use in applications that will be in contact with patients or animals.
Download iPhone 11, iPhone 11 pro and iPhone 12 STL digital files
Please insert your email to download the MDcase files and to be updated of our new open source designs!
Thanks to Diego Godoy for the collaboration on this project!
Enter Your Email Address
Your cart is currently empty.