Our innovation is inspired by the scarcest products these days, face masks!
Basically, there is a breakdown in the global stock of face masks, and it is a basic necessity for general population in most countries. In many places the authorities have also recommended the use of these masks (or similar) on public transport. These masks, despite being effective, also have some problems like poor lateral fit, short lifecycle (about 8 hours), and have another even more serious problem. Respiratory viruses, specifically SARS-Cov-2 (COVID-19) can live up to 72 hours on different surfaces. This is a problem since using a conventional mask, at the end of the day we would have a high viral load trapped within millimeters of our nose and mouth, further exposing ourselves to these dangerous microbes. Our approach is to use active (antimicrobial) materials to address this problem, PLACTIVE®️ and MDflex®️.
NanoHack was inspired by a great global pandemic. The most radical innovations are born from crises, which is why NanoHack is a unique design.
Manufactured with PLACTIVE® and MDflex®, innovative Nanocomposites developed by Copper3D, high quality PLA and TPU with a patented, scientifically validated and highly effective Nano-Copper based additive.
You can use this mask any times you want. The increasing use of single-used surgical masks and N95 respirators will have a detrimental effect in the ecosystem. To prevent this detrimental effect in our environment, NanoHack will be made with recyclable material.
NanoHack 2.0 it’s made of a monoblock PLACTIVE® structure to provide maximum protection against the external environment. Contrary to other concepts, NanoHack 2.0 is designed to be a strong and hermetic structure, sealed with a rim of Mdflex, an antimicrobial TPU.
NanoHack incorporate a novel modular filtration system manufactured with a copper nanocomposite polymer. This novel active filtration system also includes 3 layers of non-woven propylene embedded in nano-copper, and can house third party filtration materials.
NanoHack was conceived as an open source 3D printed face mask manufactured with active materials. These are some of the technical considerations prior to print NanoHack.
NanoHack Mask is a last resort device with the purpose of offering protection from airborne particles and prevent spreading liquid contaminating the airways. Published data1 has shown that the filtration materials used by NanoHack (non-woven polypropylene, the same material used in surgical masks) achieves a filtration efficiency of 96.4% for microorganisms of 1 micron and 89.5% for microorganisms of 0.02 microns1.
According to the U.S. Food and Drug Administration (FDA), the design of surgical masks do not allow a complete protection from germs and other contaminants due to their loose fit2. In addition, surgical masks are single-used devices required to be safely disposed. The Centers for Disease Control and Prevention (CDC) recommends placing these items it in a plastic bag and put it in the trash, then wash your hands after handling the used mask2. Previous published research3 has indicated that the high viral load remaining in surgical masks and respirators, can be a source of viral transmission both to the person wearing the mask or respirators and to others3. This may happen when healthcare workers touch their mask and then fail to wash their hands properly or when they dispose of the mask without proper safe disposal precautions3. In addition, pathogens shedding from surgical respirators onto patients in the operating room, increasing the risk of nosocomial infections3. Thus, NanoHack Mask uses a recyclable and biocompatible polymer containing a copper nanocomposite that has shown antimicrobial properties.
1.Anna Davies, et al. Testing the Efficacy of Homemade Masks: Would They Protect in an Influenza Pandemic? Disaster Medicine and Public Health Preparedness, Available on CJO 2013 doi:10.1017/dmp.2013.43.
2.Food and Drug Administration (FDA): https://www.fda.gov/medical-devices/personal-protective-equipment-infection-control/n95-respirators-and-surgical-masks-face-masks. Accessed March 20, 2020.
3.Borkow G, etal., (2010) A Novel Anti-Influenza Copper Oxide Containing Respiratory Face Mask. PLoS ONE 5(6): e11295. doi:10.1371/journal.pone.0011295.
Copper and Nano Copper inhibits the replication and propagation abilities of SARS- CoV4, influenza5 and other respiratory viruses, having a high antimicrobial (antiviral and antibacterial) potential and, as Copper can inactivate viruses as SARS-like and SARS- Cov4, influenza virus5, H1N1, and eliminates dangerous bacteria like Staphylococcus aureus, Escherichia coli, Listeria, among others6, after a short period of exposure, Copper3D's PLACTIVE® and Mdflex® could be an effective and low-cost complementary strategy to help reducing transmission of several infectious diseases by limiting nosocomial infectious transmission.
4. Han J, Chen L, Duan S, Yang Q, Yang M, Gao C, et al. Efficient and quick inactivation of SARS, coronavirus and other microbes exposed to the surfaces of some metal catalysts. Biomed Environ Sci BES, 2005.
5. Borkow G, Zhou SS, Page T, Gabbay J. A novel anti-influenza copper oxide containing respiratory face mask. PloS One. June 25, 2010;5(6):e11295.
6. Copper3D Inc. laboratory tests.
NanoHack was conceived as an active/antimicrobial 3D printed face mask manufactured with active materials. We will use active filters of non-woven polypropylene (3 layers) embedded in nanocopper to get an extra protection against microorganisms.
In the study by Borkow et al (2007)7, a 2.5 cm filter was designed containing a 2 cm thick top layer of 500 mg of non-woven polypropylen impregnated with 5% copper oxide particles. This study had a control that was non-woven polypropylen copper-free as a control.
Diffusion of viruses through filters containing copper oxide resulted in a significant reduction in viral titers from 0.47 log10 to 4.6 log10 depending on the virus analyzed.
According to this study, it can be concluded that a non-woven fabric filter impregnated with copper oxide is capable of generating filtration of viruses of different types, including respiratory viruses, as can be seen in the attached table.
7. Borkow G, etal., (2007) Neutralizing Viruses in Suspensions by Copper Oxide-Based Filters. Antimicrobial Agents and Chemotherapy, p. 2605–2607.
In order to achieve optimum protection against the external environment, we recommend using a triple-layer non-woven polypropylene filter embedded in nano-copper developed by The Copper Company.
Scanning electronic microscope pictures of the copper oxide-impregnated polypropylene fibers7.
If you do not have access to this type of filter, the study by Anna Davies et al1 analyze the filtering efficiency of different materials. See attached table:
CLAIMS ABOUT NANOHACK:
The purpose of the NanoMask is to offer the general population a degree of protection against airborne particles and to prevent the spread of liquid aerosols that could contaminate the airways.
1. Washing: Wash the equipment with soap (e.g. liquid dish soap) and clean water.
2. Rinsing: Rinse the equipment completely with clean water.
3. Disinfect: Disinfect the equipment to inactivate any remaining pathogens. Use chemical disinfection if plastic part cannot tolerate 80°C. Different countries have different disinfection protocols. Here are the most accessible chemical germicides and methods:
4. Rinsing: If using chemical disinfection, rinse with sterile or clean water (i.e. water boiled for 5 minutes and cooled). Sterile water is preferred for rinsing off residual liquid chemical disinfectant from a respiratory device that has been chemically disinfected for reuse, because tap or distilled water may harbor microorganisms that can cause pneumonia. However, when rinsing with sterile water is not feasible, instead, rinse with tap water or filtered water (i.e. water passed through a 0.2 μ filter). Disinfection by immersion is recommended with a contact time of 30 minutes.
5. Dry equipment: Follow the previous step by an alcohol rinse and forced-air drying.
6. Store: Store equipment dry in closed packages.
1.Infection Prevention and Control of Epidemic- and Pandemic-Prone Acute Respiratory Infections in Health Care. Geneva: World Health Organization; 2014. Annex I, Cleaning and disinfection of respiratory equipment. Available from: https://www.ncbi.nlm.nih.gov/books/NBK214361